DIY Bathtub to Whirlpool kit 6 Jets chrome

6 Whirlpool jets with adjustable water jet through the ball joint.

Chromed visible side with 80 mm diameter, for installation in a 61 mm holes.

Easy installation with hose and clip

Kit with the needed parts to build into a standard bath tub.

Pneumatic On-Off Button 

Air regulator to adjust the massage intensity

Hydromassage pump with up to 375 liters per minute performance with 750 watts.

Step-by-Step:

Installation guide: DOWNLOAD

DIY Whirlpool Air Spa Kit 12 jets

Airspa Whirlpool D.I.Y. Kit with 12 jets, blower, push button, pipe, connectors, for hot tub, bathtubs, Whirlpool tubs, 

Suitable for installation in pools up to 60cm water depth

You need a 15 mm drill bit to drill the air nozzles and a 30 mm drill bit for the compressed air button.

All details on the products in the set can be found on the page of the products in the set.

Here is the basic system structure:

Instruction - How-To Install - step by step:

DIY Air spa set for jacuzzi and whirlpool with 12 air jets

designed for installation in the buttom area.

Air spa motor ( blower) with pneumatic control,

Brass air jet with brass chrome jet head

Needed drill: 

for air jet. 12 mm

for pneumatic button: 32 mm

Suitable for installation in pools up to 60cm water depth

System :

Bubble effect whirlpool air jet P12LG25 - lateral air discharge:

Easy installation:

DIY air spa set for jacuzzi and whirlpool with 12 air jets

designed for installation in the buttom area.

700 watts air motor ( blower) with 300 watt air heater

Electronic control system with plus and minus, stepless speedcontrol.

Automatic purge controlled by a water level sensor.

Suitable for installation in pools up to 60cm water depth

eeded drill: 

for air jet. 12 mm

System :

Key: kit, set, speedcontrol button, air, spa, airspa, jacuzzi, whirlpool, jetted tub, airmotor, blower, set, diy,

Jacuzzi D.I.Y. Kit combined System

Whirlpool kit for air massage and water massage in the package -

8 water jets with ball jet head directional

12 air massage jets brass with side air outlet

Hydromassage Pump 1110 watts

Air blower 800 watts

Installation Air system:

Installation watermassage system:

Information to the installation: INFOSITE

DIY Whirlpool tub kit 4 x ASV

Representation of the structure of the hot tub water - system: (in the kit are 4 jets - in the drawing are 6)

Description of the structure of the spa kit:

The position of the ASV whirlpool jet in the tub should be chosen so that the nozzles can drain completely by emptying the bath.

The hydromassage jet should be below the water level in the filled state. 

Each nozzle is connected with 32mm hose with water and air (air above the water below)

The water comes from the tee to the pump (pump output) and is guided on both sides of the tub.

The air supply (venturi) in the whirlpool system is leaded via a T-piece to the air regulator.

During your bath you can adjust the venturi air.

Water supply

The hot tub pump (far right) is powered by the suction of water from the bathtub. Line 50 mm should be routed so that during

the emptying of the tub, the water can flow out from the pump. This PVC pipe must be bonded.

Note: The suction in this set is installed in the side of the tub. However, it should be installed as far as possible below.

DIY Whirlpool Air Spa Kit 8 jets, 600 watts

Airspa Whirlpool D.I.Y. Kit with 8 jets, blower, push button, pipe, connectors, for hot tub, bathtubs, Whirlpool tubs, 

15 mm Air jet

Instruction - How-To Install - step by step:

DIY Air spa set for jacuzzi and whirlpool with 12 air jets

designed for installation in the buttom area.

600 watts air motor ( blower) with pneumatic control

Needed drill: 

for air jet. 12 mm

for pneumatic button: 32 mm

Suitable for installation in pools up to 60cm water depth

System :

High quality air jet:

Instruction - How-To Install - step by step:

See the full installation process:

Set of two color light flat with key

Set with two multicolor light for installation, 54 mm diameter RGB LED with chrome housing, touchpad for comfortable control

• Highly luminous and extremely flat
• Low construction behind the wall
• Also ideal for freestanding baths / tubs + Tray Supports 
• Chrome plated housing 
• single colors and mixed colors possible
• Cable connections with waterproof connectors

Technical details

• Drilling: 38 mm
• Face diameter: 54 mm
• Level inside: 1 mm
• Max. wall strength: 14 mm
• Power supply Control unit: 230 Volt

​Dimensions:

Touch pad stainless steel: diameter 22 mm

Drilling for installation 19 mm

DIY Bathtub to Whirlpool kit 8 Jets chrome

8 Whirlpool jets with adjustable water jet through the ball joint.

Chromed visible side with 64 mm diaphragm diameter, for installation in a 38 mm holes.

Easy installation with hose and clip

Kit with the needed parts to build into a standard bath tub.

Pneumatic On-Off Button 

Air regulator to adjust the massage intensity

Hydromassage pump with fittings

Step by step:

Installation guide: DOWNLOAD