DIY Whirlpool Air Spa Kit 8 jets, 400 watts

Airspa Whirlpool D.I.Y. Kit with 8 jets, blower, push button, pipe, connectors, for hot tub, bathtubs, Whirlpool tubs, 

You need a 15 mm drill bit to drill the air nozzles and a 30 mm drill bit for the compressed air button.

All details on the products in the set can be found on the page of the products in the set.

Suitable for installation in pools up to 40cm water depth

Here is the basic system structure:

Instruction - How-To Install - step by step:

DIY Whirlpool Air Spa Kit 16 jets, 800 watt

Airspa Whirlpool D.I.Y. Kit with 16 jets, blower, push button, pipe, connectors, for hot tub, bathtubs, Whirlpool tubs, 

You need a 15 mm drill bit to drill the air nozzles and a 30 mm drill bit for the compressed air button.

All details on the products in the set can be found on the page of the products in the set.

Suitable for installation in pools up to 60cm water depth

Here is the basic system structure:

Instruction - How-To Install - step by step:

Customized Whirlpool Kit Concrete

for concrete hot tub

with 24 air pool jets

24 miro jets WS10

1350 watts pump

900 watts air blower

DOWNLOAD as PDF

This is how it looks after some years:

Air spa bubble Set for Whirlpool Tubs 24 jets

Set with:

24 x Stainless steel air bubble jets with 10 mm jet head, for 6 mm drilling

1 x Manifold with 12 exits 4 mm push-fit connection

12 x Tee connector push-fit 4mm

12 x Elbow connector push-fit 4mm 

24 m hose 4 mm

1 x blower hose

1 x air spa blower 100 l/min  (especially quiet)

System installed:

System verbaut:

Not included in the set: control system

Whirlpool KIT 8 jets 4 x 3" & 4 x 2" 

4 x whirlpool jet with adjustable water jet

By turning the cover, the intensity of the massage jet can be adjusted on each nozzle.

4 x larger 3 inch nozzle

Stainless steel visible side with 84 mm screen diameter, for installation in a 56 mm hole.

Installation depth: 90 mm

Whirlpool-Jacuzzi-Hottub-Jet-Duese-Edelstahl-3-Zoll-Inch-Stainless-Steel-3-4-inch-input-s

4 x smaller 2 inch nozzle

Stainless steel visible side with 52 mm screen diameter, for installation in a 39 mm hole.

Each:

Water connection to plug on for hose 3/4 "

Venturi - air supply through air connection 10 mm

Whirlpool kit with 8  jet pump suction air regulator for air venturi, hydromassage pump to 375l / min,

A suction supplies the pump with water - 50 mm pipe.

A 50 mm T-piece from the pump supplies the two 4-way water distributors with water from the pump. A reduction is inserted there so that the 50 mm hose fits.

On the other hand, the water distributor is closed with a cap.

The 3/4 "hose supplies each nozzle individually with water from the water distributor (shown in blue)

10 mm hose connects each air connection of the water nozzle with the distributor on the air regulator. The venturi air of all nozzles is controlled centrally via this.

DIY Whirlpool tub kit 80mm

Kit for whirlpool bathtub with six side jets with ball head, inlet fitting, pneumatic pump and on-off switch

Representation of the structure of the hot tub water - system:

Description of the structure of the spa kit:

The position of the ASV whirlpool jet in the tub should be chosen so that the nozzles can drain completely by emptying the bath.

The hydromassage jet should be below the water level in the filled state. 

Each nozzle is connected with 32mm hose with water and air (air above the water below)

The water comes from the tee to the pump (pump output) and is guided on both sides of the tub.

The air supply (venturi) in the whirlpool system is leaded via a T-piece to the air regulator.

During your bath you can adjust the venturi air.

Water supply

The hot tub pump (far right) is powered by the suction of water from the bathtub. Line 50 mm should be routed so that during

the emptying of the tub, the water can flow out from the pump. This PVC pipe must be bonded.

Note: The suction in this set is installed in the side of the tub. However, it should be installed as far as possible below.

Suction:

Pneumatic on-off button:

Air regulator

DIY Whirlpool kit back massage WS10

View of the hose system (without pump)

To reach the air regulator better, it can be installed sideways too.

View from the side:

View of the back with pump.

To glue the parts together we recommend our PVC glue 

Key: kit, d.i.y., diy, yourself, whirlpool, tub jetted, backmassage, spa, hydromassage, 

Whirlpool Kit 10 jet back massage

Kit for DIY Whirlpool jacuzzi jets with stainless steel covers, water distributor, air distributor for air regulator

Kit with:

9 x 2" mini jets directional with stainless steel cover

1 x 3" rotation jet with stainless steel cover

Water manifold 4 exits 3/4"- 2" inlet

Water manifold 6 exits 3/4"- 2" inlet

4 meter 2" hose for water supply

10 meter 10 mm hose for air supply of the venturi water jet

Y-pieces

air mainfold extention - to be added to existing air manifold.

Whirlpool DIY Kit - pump and suction

Kit for a diy whirlpool jacuzzi -

Kit with:

Hydromassage pump

2 x Slice valve

2 x Y-piece

4 meter 2" hose for water supply

Kit 4 hydromassage jet 4" Stainless steel

Kit for hottub jacuzzi jets with stainless steel covers, water distributor 6-fold, air distributor 6-fold with air regulator

Kit with:

4 jets 4" with front face in stainless steel

Water manifold 4 exits 3/4"- 2" inlet

4 meter 2" hose for water supply

10 meter 10 mm hose for air supply of the venturi water jet