Outside Whirlpool kit 6 Jets stainless steel - 1100 watts

6 Whirlpool jets with adjustable water jet through the ball joint.

Stainless steel faces with 84 mm diameter, for installation in a 56 mm holes.

Water connectioin 3/4" 

Air venturi conneciton: 3/8" Inox

Front Face: Stainless steel / Inox

Face diameter: 84 mm

Drilling: 56 mm

Sizes Body:

Kit with the parts to build into a compact pool.

ø 50 mm - Suction hose between suction and pump

ø 50 mm - pressure hose between pump and manifold

3/4" hose between manifold and jets.

Pneumatic On-Off Button 

Air regulator to adjust the massage intensity and suction

Hydromassage pump with up to 440 liters per minute performance with 1100 watts.

DIY Bathtub to Whirlpool kit 6 Jets chrome

6 Whirlpool jets with adjustable water jet through the ball joint.

Chromed visible side with 64 mm diaphragm diameter, for installation in a 38 mm holes.

Easy installation with hose and clip

Kit with the needed parts to build into a standard bath tub.

Pneumatic On-Off Button 

Air regulator to adjust the massage intensity

Hydromassage pump with up to 375 liters per minute performance with 750 watts.

Step-by-Step:

Installation guide: DOWNLOAD

Starter Kit 4 x 14 mm Multicolor LED light with controller

Set with 4 x lightpoint mini LED lights for wall fitting - up to 20 mm strength.

Set with cable: 2 x 63 cm / 2 x 43 cm

To electronic board + to next light each: 63 cm

Light body for 10 mm Drilling, facet design, 14 mm diamter

The LED is pushed in after the body ist installed from behing and fixed with the rubber.

Set with 4 light and controller - for 12 volts power supply.

Technical details LED

LEDs per Quad-LED: 4
Typical Max Current 80 mA

Technical details with controller

Max # LEDs:   40 (4 in each lamp)
Required Input Voltage:  12V AC 

Typical Max Output Current / Power 1 Amp / 12 Watts

expandable up to 40 lights ( 10 x kit with 4 LED) is possible.

Function: automatic color change, single colors, mix colors - switching by turning- off / on of the 12 volts power supply.

Kit 4 hydromassage jet 4" Stainless steel

Kit for hottub jacuzzi jets with stainless steel covers, water distributor 6-fold, air distributor 6-fold with air regulator

Kit with:

4 jets 4" with front face in stainless steel

Water manifold 4 exits 3/4"- 2" inlet

4 meter 2" hose for water supply

10 meter 10 mm hose for air supply of the venturi water jet

DIY Air spa set for jacuzzi and whirlpool with 12 air jets

designed for installation in the buttom area.

800 watts air motor ( blower) with pneumatic control,

Brass air jet with brass chrome jet head

Needed drill: 

for air jet. 12 mm

for pneumatic button: 32 mm

Suitable for installation in pools up to 60cm water depth

ystem :

Easy installation:

Set with 6 x Whirlpool tub jet ASV -15

64 mm nozzle for whirlpool bath tubs

Drilling: 42 mm

Cover chrome-plated

Swivel ball head

32mm Water connection

32 mm air connection

Maximum wall strenght: 10 mm

piping + plumbing

Installation prinzipal:

Pneumatic Set On-Off, 2m, push button chrome

Set consisting of:

Pneumatic Push Button 44 mm

Chrome plated air push button with 44 mm visible diameter

for drilling : 30 mm

For 3 mm air hose connection.

As spare part or replacement for hottubs, whirlpools, or jacuzzis

Dimensions:

Pneumatic On - Off switch 230V

Electrical pneumatic switch, for hose ø 3,0 mm

with hose fixing

for pneumatic hose 3 mm

with silicone seal

for drilling: 14 mm

Hose for the pneumatic button

Length = 2,0 m

Hose for pneumatic button 3,0 mm PVC,

pushbutton hose, size according to pneumatic button in the shop.

Material: PVC

Active Bonding Set - PVC-U and ABS glue with brush + Cleanser 500 ml

This adhesive is to be used for the safe and tight connection between the ABS and PVC-U components.

The materials are dissolved and merge with each other in a short time, so that a firm bond is formed.

Usege:

Clean both sides ate the area where you want to glue with the cleaner

Add the glue on both sides - you can use a brush

Join the two parts together

The assembled joint should not be disturbed for 5 minutes (below 10°C - 15 min.).

For a pressure test wait at least 24 hours, in case of a repair wait 1 hour per bar.

Air Spa Electronic kit with touch pad and water level sensor

Topside touch pad round 53 mm

Frame chrome plated

Drilling: 36 mm

Air spa (blower) system ON - OFF function

Minus - key and Plus key

Capacitve dry run protection (level sensor) to be fixed outside the tub.

For automatic purge - after the drain of the tub.

For blower up to 1300 watts, 230 Volts 50/60 Hz.

DIY Whirlpool kit 4 x back massage Micro 20-20

The pump is equipped with the built-in pneumatic pushbutton- to switch the pumpe on and off.

Key: kit, d.i.y., diy, yourself, whirlpool, tub jetted, backmassage, spa, hydromassage,