Benn Face Shield face mask

Face mask to protect against splashes and droplets

Full face mask

Splash guard drip protection visor

High quality transparent

Protective mask & splash protection for the face, mouth and eyes

Easy attachment: hanging on the ears, additional optional rubber band attachment

Universally applicable and can be used for different sizes.

Prevents your own unconscious touching of the face.

Inexpensive and reusable.

Temperature resistant up to 100 ° C.

Treatable with disinfectant.

Can be combined with mouth protection, glasses and headgear.

No certification available.

Not tested medically or otherwise.

Please send special inquiries for this product to: anfrage@wuschik.com

10 x Replacement A & S air spa jet brass

Nozzle cover for A & S Whirlpool tubs and whirlpool bathtubs,

floor nozzle orifice for air nozzles, chrome plated with side air outlet

Airmotor, blower E-800 bubblemotor for jacuzzi, jetted tub or whirlpool 

The Aerospa air blower type E is build in compactly.

The low noice disapeare behind the noice of the bubbles in the jetted tub. Airblower, for jacuzzi bath tubs.

Air connection 32 mm. Fitting can be crewed to open. Motor: 800 watts

Technical details:

Volume: max 2,5 m³/min

max. Pressure: 0.025Mpa

Power consumption: 800 watts

Voltage: 230V 1N~ 50-60Hz

Current consumption: 3,6A

Noice level: <73 db(A)

Weight: 2,0kg

Ambient temperature : -10°C bis 50°C

Max humidity: max. 80%

max. water depth: 0,8m

Pin for over-intake Tap-over overflow LONG

Pin for overflow fittings

Spare part for the rotary wheel rosette

For systems with water inlet - version LONG

Dimensions:

Total length: 85 mm

Shank: 10 mm

Front panel: 33mm

Whirlpool shutters set

Set to close nozzles in a hot tub.

Consisting of

Washers for the water nozzle
Disc for the intake
sealant

The sizes needed vary from pool to pool.

Please check before ordering and ask for other sizes of discs.

Here is our clip :

or on youtube: How-to close pool jets​

3 Pool Wall Steps

Set wall steps for pools, climbing aid for setting in concrete and renovating. Set of 3 steps for pools

Dimensions see pictures:

Step width: approx. 30 cm

Step depth: approx. 12.5 cm

Total width about 38 cm

These in-wall ladder steps can be replaced by cutting out existing steps, using grinder saws and mini-jackhammers. Install the new steps into hydraulic cement, being sure to fill the underside pocket of the step with cement before placement. Use heavy timbers to hold steps while they set up. To finish, patch around the wall steps with a plaster mix, and cover the steps with wet burlap (to slow drying) until the pool is filled again. 

25 x Double Grip Plastic Hose Clamp

for 12.0-13.8mm

Material: PA66

Mini jet 32 - 20 chrome

Hottub and pool spa, Jacuzzi jet Mini Nozzle , face diameter 36mm, for 23mm drilling, 32 mm water connection, 20mm air pipe 

Material body: PVC

Material cover: plastic chromed

Mounting hole 23 - 24 mm

Hexagon socket: wrench size SW 10

Dimensions:

Jet ASV 32-20 Chrom

Whirlpool nozzle with 32mm water connection, 20 mm air connection, aperture 67 mm, mounting hole 42mm, with cover and ball head

Dimensions:

Bowden cable double for residual water staining

Pull system, cable for baths drain with connection for whirlpool emptying, double

Suitable for Viega Ab overflow set with residual water connection

Total length: approx. 1.0 m