Whirlpool and Spa Pump - Tiper 0 90 115V 60 Hz

NOTE: 110/115 volt 60 Hz for USA or African countries

Compact, single-cell, centrifugal pumps, designed for recirculating water in hydromassage systems.

With a complete draining device for preventing residual liquid retention in each cycle.

Built-in thermal protection and complete insulation of more than 3750 V.

Suction connector for a pipe with an outer diameter of 50 mm, or for clamps with 58 mm pipes.

Double discharge-outlet connector for a pipe with an outer diameter 32 mm, or for clamps with 40 mm pipes.

Electric features:

Intensity [A] 6,8

Input power P1 [kW] 0,8

Condenser capacity [µF] 30µF-450V

Dimensions, weights and packaging:

Width: 40 cm

Height: 19 cm

Depth: 25 cm

Individual packaging gross weight: 6,900 Kg

Individual packaging volume: 0,019 m³

Units per pallet in individual packaging: 60

Usage limits:

Pressure range: 10-1

Maximum working pressure: 1,50

Electrical characteristics:

Number of motor phases: monofasico

Number of poles (motor): 2

Manufacturing characteristics: Number of impellers: 1

Series features Tiper 0:

Equipment Check valve: No

Draining plug: No

Fittings:

Support base: Incluido

Electrical characteristics

Electrical isolation: Clase F

Motor speed operation: Velocidad constante

Motor type: Asíncrono

Protection rating: IP55

Reset: Automático Service factor: S1

Service type: Continuo Manufacturing characteristics

Discharge connection type: Racor encolar

Discharge diameter: D32

Impeller type: Abierto

Motor cooling: Ventilador

Stages: Bomba centrífuga monoetapa

Suction connection type: Racor encolar

Suction diameter: D50 Tightness by: Cierre mecánico

Materials Diffuser: PP + 30% GF

Discharge body: PP + 30% GF

Gaskets: NBR

Impeller/s: PPO + 30% GF

Mechanical seal: Grafito-Esteatita

Mechanical seal bracket: PP + 30% GF

Motor casing: Aluminio

Nuts and bolts: Acero inoxidable AISI 304

Outer pump body: PP + 30% GF

Pump shaft: Acero inoxidable AISI 420

Suction body: PP + 30% GF

Support base material: PP + 30% GF

Usage limits Liquid temperature (ºC): Min: 4 - Max: 50

Maximum no. of motor start-ups (start-ups/minute): 0,5 Maximum

working pressure (bar): 6